How to clean and maintain Mesh Filter Pack?
The mesh filter pack
is made into a sheet-like filter that we usually use, and different holes can be made on it to adapt to various needs. At the same time, when we are faced with different environments, we can also make meshes of various shapes to adapt to the environment. It is mainly used in the processes of distillation, absorption, evaporation and filtration in rubber, grain and oil screening, petroleum, chemical, light industry and machinery industries. The edge of the filter mesh can not be notched, and the edge of the black silk cloth filter must be complete, without hair, and the appearance of the edge is smooth and free from irregularities. The overlap is neat and the edges are completely smooth. No breakdown, no light transmission point at the solder joint. In addition, the deformation of the edging is rigidly matched to the sealing requirements of the spinning assembly, and the sealing can be directly applied to the sealing without additional metal sealing ring.
1) After a period of use, the filter mesh pack in the device will precipitate a lot of impurities, resulting in increased pressure and flow rate of the device. At this time, the filter mesh pack needs to be cleaned in time to continue to use;
2) The filter mesh pack device usually adopts the horizontal installation method, and the direction of the import and export must be consistent with the direction of the arrow marked on the device;
3) If the stainless steel wire on the filter mesh is found to be deformed or damaged after cleaning, it needs to be replaced in time.
4) Pay attention to the screen protection on the filter mesh pack when cleaning impurities, and there is no deformation or damage. Otherwise, the filter mesh after reinstallation will not be able to exert its proper effect;
If you are interesting,pls let us talk more details.
Material:Mild steel/plain steel filter mesh pack