Major in Decorative Wire Mesh, Rope Mesh, Metal Curtain Mesh, Extruder Screen Mesh,Gabions Mesh, panels etc.

 

Mutual trust, Mutual Development And Mutual Profit!

 

Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home News

How to choose the extruder filter screen?

Good quality Extruder Screen/Screen Pack for sales
Good quality Extruder Screen/Screen Pack for sales
BM help us lots of deals ,every time they are finished all of the jobs in time,Every Extruder Screen Disc Order Suit our standard.From South Africa

—— Bob

We work with BM Metal Mesh since 2010 years , they have been provding Quality Gabions Basket Materials and excellent sales after service .From Sweden

—— Paul

Good service and quality decoration metallic mesh ,you good option for purchase Decoraive Metal Mesh-From New Zealand

—— Tim

Aviary Mesh/ Parrot Wire Net Delivery time is on time.Quality and service is very good.work together in future- From England

—— Georgia

We works on plastic extrusion we need a high pressure peak at the end of extruder before die. So we use screen filter mesh to keep pressure high,work well

—— Jennifer

I'm Online Chat Now
Company News
How to choose the extruder filter screen?
How to choose the extruder filter screen?

How to choose the extruder filter screen?

 

The filter screen is an important part of the extruder, and the filter can be used to produce a qualified product. Extruder filters are used in the filtration and blending of various viscous flow materials and products such as plastics, chemical fiber, rubber, hot melt adhesives, adhesives, finishing materials, and mixtures. In general, the filter mesh (or the number of wires per inch) is 20 to 150 or more. The 20 mesh filter is coarse; the 40 to 60 mesh filter is fine; the 80 to 150 mesh filter is fine. Most filter meshes are woven in squares, with the same number of wires in each direction. The Dutch-style weaving method uses coarse wire in the horizontal direction and specifies a double number, for example, 32 x 120 wires/in (1in=25.4mm). Filters made with the Dutch weaving method do not require the use of a parallel screen within the filter unit to provide fine filtration.


The pore size of filters with the same number of meshes is determined according to the diameter of the wire, and it does not need to be exactly the same. For example, a 20-mesh filter made of 24 in. diameter and 0.02 in. diameter wire has a 0.01 in. opening per side; and is made of 30 in. and 0.01 in. diameter metal wire. The 20 mesh filter has a slightly larger opening on each side of 0.04 in. This is because the fine metal wire is not sufficiently finely filtered and is more likely to clog (1in = 25.4mm).


In general, the installation of the filter device is that the coarsest filter screen faces the protective plate, and the finest filter screen faces the extruder. For example, the filter arrangement from the protection plate to the extruder may be 20 mesh/40 mesh/60 mesh because this arrangement prevents the filter from becoming plugged and can “blown” impurities into the protection plate. Hole inside. If the finest mesh is 80 or more meshes, to prevent the mesh from being contaminated by the rotational movement of the molten material or large contaminants, a coarse mesh can be placed on the front (eg 20/100/60/ 20 mesh arrangement). Because this type of device is the same from both sides, in order to ensure that they are not turned upside down, symmetrical arrangements are sometimes used (20 mesh/60 mesh/100 mesh/60 mesh/20 mesh)

 

 

Pub Time : 2013-08-28 17:29:27 >> News list
Contact Details
AnPing BangMai Metal Mesh Product Co.,Ltd

Contact Person: Ms. karen

Tel: 86-159-3230-4587

Fax: 86-318-7523109

Send your inquiry directly to us (0 / 3000)