Fifty-Three References of Rope Mesh, One Production Philosophy
Wire rope mesh has become one of the signature products of ANPING RUIBEI METAL MESH FACTORY. The current catalogue lists 53 references spanning hand woven knotted mesh, ferrule clamped X-Tend mesh and heavy containment netting, with cable diameters from 1.2 mm to 8 mm. The range is used wherever a barrier must be strong, flexible, transparent and maintenance free at the same time.
Each panel begins as stainless steel cable that is hand woven at the crossing points by trained operators. This labour-intensive method produces a smooth, burr-free node that will not abrade the skin of animals or the hands of visitors, and it allows the aperture to flex under impact without permanent distortion.
Specification Overview
| Parameter | Standard Range |
|---|---|
| Material | AISI 304, AISI 316, AISI 316L |
| Cable diameter | 1.2 mm, 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm up to 8 mm |
| Cable structure | 7 x 7, 7 x 19, 1 x 7, 1 x 19 |
| Aperture | 20 x 35 mm to 200 x 346 mm, custom on request |
| Panel form | Flat panels, framed panels, curved and cylindrical sections |
| Finish | Natural bright, black oxide, RAL powder coating |
Performance Highlights
- Animal-safe construction — hand woven nodes eliminate sharp wire ends and reduce injury risk in primate and large cat enclosures.
- High tensile strength — stainless steel cable cores carry heavy point loads, making the mesh suitable for climbing animals and crowd barriers.
- Full transparency — visitors see the exhibit rather than the barrier, a decisive factor for modern zoo design.
- Corrosion immunity — AISI 316 mesh performs in coastal, humid and chlorinated environments without rust bleed.
- Long service life — no repainting, no mesh replacement cycle, no hidden maintenance budget.
Proven Applications
Zoo mesh and animal enclosure fencing remain the largest application, covering aviaries, butterfly houses, reptile enclosures, monkey islands and big cat viewing platforms. Beyond zoos, the same mesh secures staircase openings in shopping centres and offices, forms safety barriers on balconies and bridges, protects rooftop plant areas, and serves as decorative tensioned netting in hotels and airports.
Ordering and Logistics
Panels are produced to size, with stainless steel edge rods and anchor brackets available so that installation requires only basic hand tools. The factory supplies detailed fixing drawings, and technical staff advise on cable diameter and aperture selection based on the species or load case involved.
Export shipments are consolidated in wooden cases with protective wrapping, and can be combined with X-Tend cable mesh, architectural mesh and fence panels from the same production site. The sales team handles both small trial orders and full container loads, with delivery from Tianjin and Qingdao ports.
Discuss your enclosure or balustrade project with the BM Metal Mesh team at bmmetalmesh.com and receive a specification package within two working days.
