Latest company news about 12 x 64 and 14 x 88 Dutch Weave Screen Packs for Plastic and Rubber Processing Plants

November 14, 2026

12 x 64 and 14 x 88 Dutch Weave Screen Packs for Plastic and Rubber Processing Plants

Two Weaves, One Filtration Strategy

Choosing between 12 x 64 and 14 x 88 Dutch weave is a decision about dirt load, not about quality. The coarser 12 x 64 handles heavy contamination in recycling and regrind lines; the finer 14 x 88 delivers sharper particle cut-off in virgin polymer compounding. Anping Ruibei Metal Mesh Factory produces both as 250 mm wire mesh filter discs, so a plant can step between grades as feedstock changes.

Both are woven as single-layer Dutch cloth with a defined reverse-side channel, then punched to diameter and optionally spot welded to a support rim.

Weave Comparison

Property 12 x 64 14 x 88
Relative filtration Medium Finer
Dirt holding capacity High Moderate
Typical use Recycling, regrind Virgin compound, film
Layer Single Single
Diameter 250 mm, custom 250 mm, custom

Practical Advantages

  • Same outer diameter across both grades, so no tooling change when switching weave.
  • Flexible working behaviour, allowing discs to seat evenly on worn breaker plates.
  • Consistent weave geometry batch to batch, which keeps pressure alarms predictable.
  • Free samples of both grades for side-by-side trials on the same line.

Plastic processing, rubber, chemical and pharmaceutical plants all use these discs for the same reason: they prevent foreign particle contamination in the final extrusion product and protect downstream tooling.

ANPING RUIBEI METAL MESH FACTORY (brand BM) is a wire mesh manufacturer and exporter established in 2015 in Anping County, Hebei, China, the country's wire mesh industry base. The factory runs 50-100 employees, exports 80%-90% of its output and reports annual sales of USD 0.8-1.3 million. Its range covers decorative wire mesh, rope mesh, metal curtain mesh, extruder screen mesh and gabion mesh, all produced under CE and CCC certification.

Ordering Information

  • Price USD 0.2-3.6 per piece, minimum order 1 piece.
  • Supply ability 50,000 pieces per week, delivery 10-15 days after deposit.
  • Payment terms: T/T, L/C, D/P, D/A, Western Union, PayPal.
  • Packing: water-proof plastic film and wooden case; sea or express shipping.

Ask for the weave comparison sheet and a sample pair; most buyers settle the grade question with a single trial run.

Selection support is part of the service. Send the current disc, or a photo with a caliper reading, and the technical team will identify the weave, confirm the equivalent grade and flag if a finer or coarser option would reduce pressure alarms. This matters most for plants that inherited a screen specification from a previous owner.