Latest company news about Fine Mesh Stainless Steel Extruder Screens from 300 to 635 Mesh Now Supplied by Anping Ruibei

November 14, 2026

Fine Mesh Stainless Steel Extruder Screens from 300 to 635 Mesh Now Supplied by Anping Ruibei

Precision Filtration for Engineering Polymers

When a line runs optical film, medical tubing or fine denier fibre, the filtration target moves from millimetres to microns. Anping Ruibei Metal Mesh Factory now supplies stainless steel extruder screen filter discs in 300, 325, 400, 500 and 635 mesh, aimed at processors who cannot tolerate a single gel or black speck in the finished product.

Fine mesh behaves differently from coarse cloth: the wire diameter shrinks, the open area narrows, and pressure drop rises quickly once the disc loads. Buying from a weaver rather than a reseller matters because weave consistency directly controls pressure build-up.

Fine Mesh Range

Mesh Typical application Material
300 mesh General engineering polymer filtration SS 304 / 316
325 mesh Film and sheet lines SS 304 / 316
400 mesh Fine denier fibre spinning SS 304 / 316
500 mesh Optical and medical grade melt SS 316 / 316L
635 mesh Highest accuracy, short cycles SS 316L

What the Buyer Gains

  • Stainless steel construction resists corrosion and survives caustic cleaning cycles.
  • Uniform aperture across the disc, avoiding local hot spots and die-line streaks.
  • Available with support rims and multi-layer backing for higher pressure duty.
  • Certified to CE and CCC, with material certificates on request.

The fine mesh discs are used wherever the extrusion must stay optically or electrically clean: capacitor film, battery separator film, medical tube and precision profile.

ANPING RUIBEI METAL MESH FACTORY (brand BM) is a wire mesh manufacturer and exporter established in 2015 in Anping County, Hebei, China, the country's wire mesh industry base. The factory runs 50-100 employees, exports 80%-90% of its output and reports annual sales of USD 0.8-1.3 million. Its range covers decorative wire mesh, rope mesh, metal curtain mesh, extruder screen mesh and gabion mesh, all produced under CE and CCC certification.

Supply Terms

  • Price USD 0.2-3.6 per piece depending on mesh and diameter.
  • Minimum order 1 piece; any quantity accepted because we are the factory.
  • Supply ability 50,000 pieces per week; delivery 10-15 days after deposit.
  • Free samples, water-proof plastic film and wooden case packing.

For fine mesh specifications, the team recommends a short trial on the actual extruder, since achievable cycle length depends as much on the melt filter body as on the screen itself.

Fine mesh is packed with interleaving to protect the weave in transit and is shipped in rigid cases rather than cartons, because a creased 500 mesh disc is unusable. For high-value polymer lines, Anping Ruibei also supplies matched spare sets so a pressure excursion never stops the extruder while a replacement is sourced.