Latest company news about Multi Layer Filter Screen Packs for PP PE PC PS HIPS PET PVC Plastic Extruders

November 14, 2026

Multi Layer Filter Screen Packs for PP PE PC PS HIPS PET PVC Plastic Extruders

Why One Layer Is Rarely Enough

Single-layer discs are economic, but they fail early when a line processes mixed feedstock. A multi-layer filter screen pack stacks a coarse support layer, a fine filtration layer and, on request, a protective top layer, so each layer does one job: carry load, catch particles, distribute flow. Anping Ruibei Metal Mesh Factory produces these packs for PP, PE, PC, PS, HIPS, PET and PVC extruders.

The stack is sintered or edge-welded depending on duty, then punched to the diameter of the breaker plate. The result is a pack that holds far more contamination than a single disc of the same filtration rating before reaching the pressure limit.

Typical Layer Configurations

Configuration Structure Best for
2 layer Coarse support + fine filter General PP / PE extrusion
3 layer Protection + filter + support Recycling with high dirt load
4-5 layer Sintered multilayer stack PET, PC, HIPS precision work
Rimmed pack Multilayer disc with steel rim High pressure screen changers

Operational Benefits

  • Higher dirt holding capacity per change, extending the interval between screen changes.
  • Fine layer protected from abrasion, so filtration accuracy holds through the whole cycle.
  • Available in stainless steel 304, 316 and 316L for corrosive polymers.
  • Custom diameters, mesh combinations and rim styles made to drawing.

For converters running several polymer types on one machine, the pack can be optimised per product rather than compromised across the range.

ANPING RUIBEI METAL MESH FACTORY (brand BM) is a wire mesh manufacturer and exporter established in 2015 in Anping County, Hebei, China, the country's wire mesh industry base. The factory runs 50-100 employees, exports 80%-90% of its output and reports annual sales of USD 0.8-1.3 million. Its range covers decorative wire mesh, rope mesh, metal curtain mesh, extruder screen mesh and gabion mesh, all produced under CE and CCC certification.

Ordering and Delivery

  • Minimum order 1 piece; any quantity accepted, price USD 0.2-3.6 per piece.
  • Supply ability 50,000 pieces per week; delivery 10-15 days after deposit.
  • Free samples for line trials; tooling available with charge for special sizes.
  • Water-proof plastic film and wooden case packing; sea or express shipping.

Send the polymer, machine model and current change interval, and the technical team will propose a layer stack that reduces downtime without raising filtration risk.

Because the pack is assembled rather than simply punched, the layer stack can be tuned after a trial. Buyers typically start with a three-layer configuration, review the pressure trend over two weeks, then fix the final specification for repeat ordering. That iterative route avoids over-specifying filtration and paying for pressure drop the line does not need.